Flying Block
Flying Block
Block Type Flight
Default Key O = Rotate
Weight 0.5
Explosive No
Destructible No
Interactive Yes
Version Introduced v0.01

The Flying Block is a crucial element of your plane/helicopter. It propels your machine in the direction the block is facing.

If your machine isn't balanced, you can use the Paramer Tuning tool to adjust the rotating speed of the block.

The rotation speed needed to lift your machine is 1 speed per 3 units of weight. So a flying block spinning at the speed of 1.0 can lift three units of weight (see this).


  • The design of this block would appear to by inspired by Leonardo da Vinci's "aerial screw".
Block Navigation
Blocks Wooden (Small Block/Block/Pole/Panel) • High Friction Plate • Joints (Swivel/Hinge/Ball)
Locomotion Wheels (Motor/Unpowered/Large/Small) • Cogs {Medium (Powered/Unpowered)Large} • Steering (Hinge/Block)
Mechanical PistonDecouplerContractible SpringSuspensionSliderSpinning BlockGrabberWinch
Weaponry Ammunition (Flaming Ball/Bomb/Boulder) • Circular SawDrillMetal BladeSpikeCannon (Shrapnel/Water) • FlamethrowerHolderRemote BombVacuum Block
Flight Circular PropellerAerodynamic Propeller (Small) • BalloonWing (Panels) • Ballast
Armour Spike BallMetal PlatesPlowHalf Pipe
Hybrid Portable CannonSteam Cannon
Uncategorised ChainCore Block